1965, No Tank, Well sort of.
Anyway I know someone has done a nifty re fit on their 41 for a holding tank.
Any information would be helpful, Preferably one that worked well.
I eliminated the front V berth Thru Hull and V Berth Head, It was just too cozy
for my crew.
The original Head was a little used, what Next ?
41C 41RL#83
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 8 of 8
Hybrid View
-
Hatteras 41C Holding Tank, Where and How
-
02-20-2018 06:47 PM #2
Re: Hatteras 41C Holding Tank, Where and How
I have a lectasan under the port bunk.
Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
02-21-2018 12:14 AM #3Senior Member
- Join Date
- Jun 2007
- Posts
- 4,974
Re: Hatteras 41C Holding Tank, Where and How
I've been on a few 41c and seen them in multiple locations. On my boat, somebody worked hard and put the holding tank up in the v-birth behind the center 2 draws (right below anchor locker door).
On another boat it was below the floor in the bathroom (picture).
FTFD... i drive a slow 1968 41c381
-
02-21-2018 09:13 AM #4
Re: Hatteras 41C Holding Tank, Where and How
Nice install.
Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
Re: Hatteras 41C Holding Tank, Where and How
My 41c had a vacuflush and the holding tank and all of the vacuflush system fit perfectly where the v berth he’d used to be
-
Re: Hatteras 41C Holding Tank, Where and How
The placement of a holding tank is something I thought on for a long time. The boat is a series 1 45c so probably somewhat more space to play with however what I did was cut the plywood floor in the front stateroom just inside the original framing. Made a platform to support the tank and got it installed. I'll spare you the gory details here but it is a perfect fit and it's 40 gallons, specifically a hts40. Everything works with gravity so no effluent sitting in hoses. The pump out is just starboard of the fairlead on the gunnel and piped with schedule 80 If you have any questions pm me