Been piddling with this project for a couple months now. Finally got some non-rainy weather to make some progress.
The idea is to take an old fighting chair I had in storage with a ladder back, and convert the back into a rocket launcher with rigging station and some tackle storage.
In a perfect world I would have built this out of teak but after searching for teak I decided just to go with a birch plywood and epoxy coating which will be painted.
Some goals
- as many rod holders as possible
- as many cup holders as possible
- as large of a rigging station as possible
- as much tackle storage as possible
- look good
First up, I needed to mock something up. With nothing more than a general idea of what size/shape I wanted this thing I needed to mock up on something cheap. So I chose blue foam insulation at home depot. This was approx $13 for a 4x8 sheet.
Cut up a couple of pieces before I got the general shape I was looking for. Traced and cut out discs to use for rod holders and cupholders
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
Results 1 to 10 of 26
Threaded View
-
02-19-2018 10:25 AM #1Senior Member
- Join Date
- Jul 2013
- Posts
- 1,188
DIY: Rocket Launcher for fighting chair
Last edited by rustybucket; 04-23-2018 at 11:02 AM.