One other question....What are you using for header paint? VHT White? :?
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 31 to 40 of 60
-
04-05-2018 02:06 PM #31
Re: Of Shiny Engine Rooms and Wax Job Advice
-
Re: Of Shiny Engine Rooms and Wax Job Advice
Rinsing off with water. I only used the TSP to wash it all in the end. I put a bunch of old diapers under motors and it caught the stripper and debris pretty well. Wet vac'd out remainder.
Used same paint throughout. In this pic I just took, I'm trying out a bit of Rust Bullet paint to see how it might hold up. Need to go out this weekend, so that should be a good test.
IMG_8953.jpg
When the fresh paint burned off back in '15, I just painted that area with phosphoric acid and it controlled the urge to rust.Semper Siesta
Robert Clarkson
ASLAN, 1983 55C #343
Charleston, SC
-
04-05-2018 07:17 PM #33
Re: Of Shiny Engine Rooms and Wax Job Advice
Yeah the manifolds are a PITA. I have contemplated taking off the manifolds and having them ceramic coated as a solution. Lots of good coatings out there that can hold up to the heat such as jet hot.
-
04-05-2018 07:26 PM #34
-
-
04-06-2018 01:41 PM #36
-
Re: Of Shiny Engine Rooms and Wax Job Advice
Robert, You REALLY know how to make another Hatt owner feel lazy (LOL)! All jealousy aside, you give me aspiration to get started on M/V No Regrets. Been wanting to tackle the ER as well as outside structure for sometime (time off being as you know my work schedule) but, now I have a better schedule to allow me get started w/ 28 days on/28 days off work. I just hauled out for bottom paint job down at Marine Propulsion and got her back to IOP 2 weeks ago. They did a great job and behold, came back under quoted price! Anyhow, when I asked Anthony about DIY Topcoat paint, he mentioned EMC (Engineering Marine Coatings). They're local to Charleston & have a product called Quatum99. Thinking of using this for my DIY project topsides. Not attempting to promote this but, this product requires no tipping after rolling. Going to try it on fly bridge first.
Would like to visit Aslan if you'll have me over in May to get more 'Inspired'!
BR's,James
53' MY "No Regrets"
I.O.P, S.C.
-
Re: Of Shiny Engine Rooms and Wax Job Advice
James, before you use the Quantam watch the you tube videos called Boat Works Today. He has an episode about that paint. He tested it. Worth your time to watch it. John
Mahalo V
1974 53 Motoryacht
Hull Number 406
San Diego, Ca. Ready 32 Nordic Tug, Brunswick Ga.
-
04-08-2018 03:48 PM #39Senior Member
- Join Date
- Jul 2007
- Posts
- 1,001
Re: Of Shiny Engine Rooms and Wax Job Advice
If you are going to use aircraft stripper in you engine room or bilges, be sure you have lots of ventilation. Methylene Chloride is deadly in surprisingly low concentrations.
-