I was just gifted a raymarine st70, smart pilot x10 course computer, and fluxgate compass. I want to replace my Robertson ap300x and j300(3000?). My question is what else will I need to make this work. I assume the rudder feedback unit must be replaced with raymarine, correct? What about the pump? I would really like to avoid messing with hydraulic lines if I can. If my pump is 12v and reversible does it need to be raymarine?The purpose for the switch is to integrate autopilot with my mfd’s. Thanks
Update: I see that the X10 has a limit of 10a draw from the drive unit. I need to determine which drive unit I have and go from there. If the pump exceeds the 10a rating, are there any interfaces (relays, diodes) that will take the signal from the x10 and provide more power to the drive unit or must I just upgrade to the x30 course computer. No other options.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
Results 1 to 4 of 4
Threaded View
-
02-18-2018 10:06 PM #1Senior Member
- Join Date
- Apr 2014
- Posts
- 296
Electronics experts. Raymarine autopilot with Robertson reversible pump?
Last edited by oceanjake; 02-19-2018 at 03:49 PM.