Sorry for a dumb question but how do I release my Rupp antenna collar from the upper standoff to lower the antenna? I suspect it must unscrew somehow as I see plier marks on the black plastic part from the PO. I am replacing the antenna with a new SSB antenna and am using the same mounting hardware and standoff other than having bought a Rupp two piece antenna collar to use with the new SSB antenna.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 7 of 7
Thread: Rupp Antenna Collar- How To?
-
Rupp Antenna Collar- How To?
-
Re: Rupp Antenna Collar- How To?
just push the black plastic up allowing the antenna to come through the gap
https://search.aol.com/aol/image?q=r...g&action=clickLast edited by Tim Powell; 02-04-2018 at 07:36 AM.
-
02-04-2018 08:02 AM #3Registered Member
- Join Date
- Dec 2016
- Posts
- 27
Re: Rupp Antenna Collar- How To?
I had the same issue when I first got mine. You have to turn it so the tab on the bottom lines up with the opening in the bracket. Then slide it up.
-
Re: Rupp Antenna Collar- How To?
Thanks. Makes sense now.
-
02-04-2018 10:07 AM #5
Re: Rupp Antenna Collar- How To?
The tab at the bottom right goes in the outside slot and the collar lifts up
Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
Re: Rupp Antenna Collar- How To?
Thank you.
-