Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15
  1. #1

    windlass replacement

    The time has come to upgrade the original galley maid windlass with one that can handle chain.
    Anyone care to weigh in on what I should consider?
    thanks

    Jeff Kotler
    Southern Cross
    1981 61' motor yacht

  2. #2

    Re: windlass replacement

    No question in my experience, Maxwell, they last forever, good parts availability and built like tanks. John
    Mahalo V
    1974 53 Motoryacht
    Hull Number 406
    San Diego, Ca. Ready 32 Nordic Tug, Brunswick Ga.

  3. #3

    Re: windlass replacement

    If the rest is good, you might just replace the drum with a gypsey from Galleymaid.

    Bobk

  4. #4

    Re: windlass replacement

    I tried that route, I called galley maid, the unit is to old to be upgraded.
    Jeff Kotler
    Southern Cross
    '81 61' motor yacht

  5. #5

    Re: windlass replacement

    Stay away from Anchorlift.
    Eric
    41TC 1966 Hull #53 "Requisite"
    Kent Island, MD/Ft. Lauderdale, FL

    "Though she creaks - She holds"

  6. #6

    Re: windlass replacement

    Anchorlift the worst piece of junk I ever purchased. Nothing but trouble.

  7. #7

    Re: windlass replacement

    You should consider a Lofrans. Very good quality.
    Jonathan Brein
    1982 43' DCFB #550
    "Paragon"
    Chesapeake, Virginia

  8. #8

    Re: windlass replacement

    No luck with lewmar hears good about maxwell

  9. #9

    Re: windlass replacement

    I ve used both lewmar and maxwell, both good units.

    I m Going to replace my galley maid (all chain plus rope capstan on top) with either lewmar or maxwell since I m converting to 24v Will have it for sale.
    Pascal
    Miami, FL
    1970 53 MY #325 Cummins 6CTAs
    2014 26' gaff rigged sloop
    2007 Sandbarhopper 13
    12' Westphal Cat boat

  10. #10

    Re: windlass replacement

    I have a Maxwell 2200, vertical, it has done a good job. Use it often.
    GLORY Hull # 365
    Northport, NY

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts