Looking for an original hatch adjuster circa 1965 for a 41' convertible. Need all the parts.
Also the small chrome tabs that go on the flybridge ladder. It is the piece that is between the teak
step and the acorn nut. Acts as a washer, but also keeps the teak from breaking out under pressure.
Thanks,
Mtadamek
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 6 of 6
-
07-28-2017 12:20 PM #1Senior Member
- Join Date
- Nov 2006
- Posts
- 174
Wanted: Original Hatch adjuster & ladder parts
-
Re: Wanted: Original Hatch adjuster & ladder parts
Is there any photos of what you do have/need? I think I know what you want and I may be able to help if I'm correct.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
Re: Wanted: Original Hatch adjuster & ladder parts
Do you mean those little curved pieces of metal that are between the acorn nut and the teak step? I have some of those I'll give you. I replaced all my teak steps with SS. PM me.
-
Re: Wanted: Original Hatch adjuster & ladder parts
I think I have one of the SS C clamp that the acorn nut holds down. PM ME.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
07-29-2017 12:05 PM #5Senior Member
- Join Date
- Nov 2006
- Posts
- 174
Re: Wanted: Original Hatch adjuster & ladder parts
Thank you for the Replies. Yes it is the small stainless part that the acorn nut tightens down on.
The hatch adjuster is very similar to this one:
20170729_105641.jpg
The originals usually have a chrome wingnut instead of the black knob.
Mtadamek
-
Re: Wanted: Original Hatch adjuster & ladder parts
I need one of those too!
Jonathan Brein
1982 43' DCFB #550
"Paragon"
Chesapeake, Virginia