Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Page 3 of 3 FirstFirst 1 2 3
Results 21 to 22 of 22
  1. #21

    Re: March Pumps--Possibly the Worst Customer Service Ever!

    I have a 16 and a 12 on one 5 series.

    That's about the top for them.

    The 3 should handle the 18.
    Scott
    41C117 "Hattatude"
    Port Canaveral Florida.


    Marine Electronics and Electrical Products Distributor.

  2. #22

    Re: March Pumps--Possibly the Worst Customer Service Ever!

    Quote Originally Posted by Boatsb View Post
    I have a 16 and a 12 on one 5 series.

    That's about the top for them.

    The 3 should handle the 18.
    I called up and got design spec they use. He said keep the LC-3 and look for about 6 F degree temp rise(+/- a few degrees allowed) in the water and also make sure the filter-dryer is at most warm to the touch, not hot (indicating enough subcool).

    If these are off, add more water flow. It could be my pump is old/warn as well. I'm getting about 5gpm right now. I need to clean the cooling tubes as one side of the motor gets hot to the touch and the epoxy is rough. I'll probably replace with air cooled as we are silty here when the mud gets stirred up.
    FTFD... i drive a slow 1968 41c381

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts