Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Page 3 of 7 FirstFirst 1 2 3 4 5 ... LastLast
Results 21 to 30 of 61
  1. #21

    Re: Need Hull and Engine Surveyor in Ft Lauderdale area.

    Quote Originally Posted by Passages View Post
    I asked that myself. The bottom peal was done about 15 years ago. There was some water intrusion into the core and all affected material was replaced and the entire bottom relaminated. If we find similar during the survey, price adjustment will be made or the deal cancelled.

    My biggest concern at the moment is financing. Spoke to 'the man' just a while ago and this is what he said:

    Most boat loan companies limit themselves to 20 year old boats or newer. There are 3 banks that go to 25 and only 1 that goes to 30. This boat is 30. Much as I'd like to own her, no finance = no boat.
    Correction - the bad coring was around a leaking port opening, not the bottom. The bottom peel was a correction for blisters.
    Last edited by Passages; 05-08-2017 at 07:27 PM.

  2. #22

    Re: Need Hull and Engine Surveyor in Ft Lauderdale area.

    Let's put this rumor of lack of financing for older boats to rest.

    We got approved in 2 days. Choice of 10 years @ 4.75% or 12 years at 5.6%.

  3. #23

    Re: Need Hull and Engine Surveyor in Ft Lauderdale area.

    Now for surveys,

    Broker provided the following referrals:

    Engine:
    Jack Dibelle
    Stafford Diesel
    Gary Gillesple

    Hull:
    Steve Klaity
    Kerry Nitulis
    Malcolm Elliot
    Mark Slakoff

    Anyone familiar? PM me.

    Thanks

  4. #24

    Re: Need Hull and Engine Surveyor in Ft Lauderdale area.

    Quote Originally Posted by Passages View Post
    Let's put this rumor of lack of financing for older boats to rest.
    "As long as Jim Pease doesn't beat me for the record, but he still has many years to go." from here: http://www.samsmarine.com/forums/sho...-finally-ended
    FTFD... i drive a slow 1968 41c381

  5. Re: Need Hull and Engine Surveyor in Ft Lauderdale area.

    Quote Originally Posted by Passages View Post
    Now for surveys,

    Broker provided the following referrals:

    Engine:
    Jack Dibelle
    Stafford Diesel
    Gary Gillesple

    Hull:
    Steve Klaity
    Kerry Nitulis
    Malcolm Elliot
    Mark Slakoff

    Anyone familiar? PM me.

    Thanks
    Jack Dibelle did my engine survey [CATS 3406, Northern Lights 20, 12 kw gens.] I'd use him again. Mark Slakoff did my hull and vessel survey; thought they did a good job and were quite helpful while on board, but thought the report was kinda light as there were no photos; first survey that I've had with no photos. Otherwise, no qualms.
    Bill
    Brickell - Miami, Fl
    Cape Elizabeth, Maine

  6. #26

    Re: Need Hull and Engine Surveyor in Ft Lauderdale area.

    I like the 63's but most I see are 12-71's. best thing about them to me is the nice stairway to the flybridge, something I think Hatteras really missed. I surveyed one here in San Diego with a great enclosed aft deck, but no stabilizers, beautiful boat , massive owners cabin. Congrats I am sure you will enjoy it. John
    Mahalo V
    1974 53 Motoryacht
    Hull Number 406
    San Diego, Ca. Ready 32 Nordic Tug, Brunswick Ga.

  7. #27

    Re: Need Hull and Engine Surveyor in Ft Lauderdale area.

    Gary Gillespie and Marc Slakoff
    Eric
    41TC 1966 Hull #53 "Requisite"
    Kent Island, MD/Ft. Lauderdale, FL

    "Though she creaks - She holds"

  8. #28

    Re: Need Hull and Engine Surveyor in Ft Lauderdale area.

    Sad phone call this morning.

    Based on comments here. Called Mark Slakoff. Due to schedule conflict, Mark was going to send his partner, Bill Bartosch.

    Spoke to Bill 2 days ago and had a great conversation on Vikings and Hatteras. I knew I hired the right guy for next weeks survey.

    Got a call this morning from Mark. Bill died suddenly from a heart attack yesterday.

    Damn,

    I only shared this here because Bill knew of HOF and it's great contributors .

  9. #29

    Re: Need Hull and Engine Surveyor in Ft Lauderdale area.

    Ouch. That's not good news

    Losing good resources for the forum members is always sad. When it's a person it's worse.
    Scott
    41C117 "Hattatude"
    Port Canaveral Florida.


    Marine Electronics and Electrical Products Distributor.

  10. #30

    Re: Need Hull and Engine Surveyor in Ft Lauderdale area.

    Other than the hull coring issues I would have the surveyor check the stringers very closely as there were some problems with broken stringers on these Vikings.
    Slakoff is the best if you're buying, you don't want him there if you're selling.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts