Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 16 of 16
  1. #11

    Re: missing propellers

    Quote Originally Posted by Boatsb View Post
    Tim.

    There's something your not telling us.


    Repowering? With what? I know your not going electric or low hp for economy.
    afraid to mention it the junk i will have to deal with

    I have two choices qsm11 700 hp

    just as late as friday a pair of the new cat c/9 have come up on the horizon 1000 hp

    one or the other is going to happend very soon

    The cats are comming out of a new repower with about 300 hours they are not happy with speed so they are putting c18 in their place. they have not come up with a $ amount for the cats. I have ridden in the boat they are smooth and quiet. They will put the old girl in the 30+ knot cruise range. Less weight and less fuel burn not so bad for the old girl......The guys at Hatteras do not believe it will be a keel walker.My 892s have a deposit on them subject to the repower
    Last edited by Tim Powell; 12-11-2016 at 09:22 PM.

  2. #12

    Re: missing propellers

    I heard you were actually fitting a mast and sails. I am seriously disappointed.

  3. #13

    Re: missing propellers

    C9 at 1000 hp. That's new to me. Could you mean 12.9?
    Scott
    41C117 "Hattatude"
    Port Canaveral Florida.


    Marine Electronics and Electrical Products Distributor.

  4. #14

    Re: missing propellers

    Quote Originally Posted by Boatsb View Post
    C9 at 1000 hp. That's new to me. Could you mean 12.9?
    Yes he does. Not sure how they'll get more performance from C18's. Similar HP and more weight.
    Jack Sardina

  5. #15

    Re: missing propellers

    Quote Originally Posted by saltshaker View Post
    Yes he does. Not sure how they'll get more performance from C18's. Similar HP and more weight.
    http://www.ncmachinery.com/products/...pulsion-engine

    I do not know about the c18 but this is the one i hope i get they are the 1000 hp versons
    comming out of a 60+ Jaret bay I did not listen well when they talked about the new ones. Jack is correct they would not gain much with the c18 so to tell you what they are doing i am not sure.
    Last edited by Tim Powell; 12-12-2016 at 08:09 PM.

  6. #16

    Re: missing propellers

    Cummins parts are cheaper than golden-cast iron.
    FTFD... i drive a slow 1968 41c381

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts