I know it's a long shot but does anyone know a source for the 1" rubber that fits over the Marquipt cradle irons. I would like to replace the rubber and Marquipt advises that it only uses two inch rubber now. I can have the cradle modified to accept the two inch rubber pieces but would prefer to use what was there to begin with. The pieces I am talking about are the 1" "U" shapes that goes over the metal supports for the cradle and then get bolted to the supports. The dink sits on these rubber pieces. Thanks.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 7 of 7
Thread: Cradle Rubber
-
Cradle Rubber
-
Re: Cradle Rubber
I used a strip of pliable piling fender material and secured it by using fender washers and screws through the cradle. Not all that pretty, but no one can see it unless the dinghy is in the water, and even then, no one goes back there to look.
-
Re: Cradle Rubber
Thanks. I was really hoping to find an exact replacement. I'm sort of surprised that this is not an easily found item in some home goods store or otherwise.
-
Re: Cradle Rubber
Sorry, I misread the title. It thought it said Cradle Robber and I figured you had a picture of your young new hottie here. You can imagine my disappointment.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
-
Re: Cradle Rubber
We're not policing thinking. Yet. You know us liberals. LOL
-
Re: Cradle Rubber
Been married to the Admiral for almost thirty years. The only young, new hottie on the horizon is a new dink/engine if I can't get this blasted Novurania leak and Yamaha engine issue resolved. Life's too short to be chasing silly problems for three years. It's much easier to write a check.