Anyone owned a steel boat in the past?

[douglasl]

I came across a 50+ year old Burger Motor Yacht. Its hull is steel.

How's maintenance on these boats?

Douglas

[SeaEric]

Its about like owning a wooden boat.

[rtrafford]

I came across a 50+ year old Burger Motor Yacht. Its hull is steel.

How's maintenance on these boats?

Douglas

Owned an early 60's Burger, steel. Terrific boat. Rock solid if the electrical systems have been well maintained. Virtually your entire AC current system is running without a ground, from the factory.

Pay close attention to cleats, battery terminals, thru-hulls, etc. Make sure you look closely at thickness of plating and condition of running gear during survey. Look closely at the hub of the props, looking for pink.

Terrific boats.

[rtrafford]

Also, don't paint it with any system that is opposed to patching. The steels love to pop a blister randomly on the hull and along topside welds.

[Walter P]

Why ask for trouble.... Fiberglass Hatteras' are hard to beat. Paint the bottoms and polish the rest...can't beat it.

Walt

[douglasl]

I know. I just can't find a suitable 53' Hatteras MY in the West Coast.

I'm just looking at the Burger. Not serious for now.

Thanks guys,

Douglas

[jim rosenthal]

I had a metal boat- an aluminum one, years back. LOTS of maintenance and worry. Burgers are built as well as anything out there, but even the best metal boat is much more maintenance than a fiberglass one. In fresh water, maybe a little better. Burger have as much experience at building metal boats as anyone does, except the Navy, but a lot of the risk with a metal boat is what happens after it leaves the factory- which the factory has no control over.

They DO blister easily, so Imron or Awlcraft or similar paints would be the ones of choice, not AwlGrip. There are people who say they can blend AwlGrip, but the factory does not agree.