Quote Originally Posted by bobk View Post
Re shrink wrap, you need to keep the sheet from touching the Imron or you risk some peeling paint.

I think I'd get rid of the gas and run some aviation gas through the system. It is very stable and should be ready to go when you return. Adding stabilizer to E10 will not prevent the alcohol from sucking in water and you will likely have to deal with it when you return.

Bobk
Great Idea with the Aviation gas! empty as much as possible then add it and run it fog the hell out it do the winterizing.

As Bob said about the shrink wrap spot on for any paint doesn't matter brand. I have done it for the past 3 years learned a lot of tricks I can share if you like. Just going away later today till the 2nd of Dec so pm me then if you want some tips and pics. Your 36 will actually be a little easier then my 34C because the difference in the front deck but the tips will still work for you. I would wrap it and also add lots of vents when you come back it will still be pretty clean and be as you left it.