Hi,
what are the sizes for the fuel cap and the waste water / potable water caps on the deck
West marine does not carry them, checked ace hardware and no go.
Looking to get 4 for fuel caps 2 fresh water and 1 sewage. Looking for a source around the cape / merrit island, orlando area
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 3 of 3
Thread: O-Ring Sizes
-
10-28-2013 07:10 AM #1
O-Ring Sizes
-
Re: O-Ring Sizes
I don't know the actual size but the local Tru value had them in their O-ring box when I replaced ours most recently. I would have thought that any hardware store with one of those "boxes of assorted Orings" wold have them.
Mike P
San Miguel de Allende, Mexico; Kent Island MD; San Antonio TX
1980 53MY "Brigadoon"
-
Re: O-Ring Sizes
I haven't had good luck with rubber products these days. Seems it all dry rots in no time. We used to use VITON instead of Nitril in our hydraulic systems. I'd look into a hydraulic supply for them.
"DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN
Endless Summer
1967 50c 12/71n DDA 525hp
ex Miss Betsy
owners:
Howard P. Miller 1967-1974
Richard F Hull 1974-1976
Robert J. & R.Scott Smith 1976-present