Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 11 to 20 of 23
Thread: Runnig out of time
-
09-26-2013 05:10 PM #11
Re: Runnig out of time
Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
Re: Runnig out of time
You d be surprised at how many people run at 12 or 13 kts in boats with 9kts hull speed... I see it all the time, half on plane, burning as much fuel as they would at 18... Never figured out why they run that way as it makes no sense whatsoever.
Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
Re: Runnig out of time
What would be the hull speed of a 100' boat, Pascal? Wouldn't it be around ten knots with all that waterline length?
-
09-26-2013 08:51 PM #14
Re: Runnig out of time
1.3 times the square rt of the lwl dr Jim.
12 to13 kts is about rightScott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
Re: Runnig out of time
Randy Register - Kingston, TN
www.yachtrelocation.com
www.Safes4Guns.com
aka Freebird aka Sparky1
1965 41DC #93
-
09-27-2013 01:43 PM #16Senior Member
- Join Date
- Mar 2013
- Posts
- 160
Re: Runnig out of time
This 43DC seems to like to be at 1450 & GPS says 9.5k @ 2000 she is at 12.5.- 13k the motors seem to be working to hard . I haven't checked the fuel burn yet but it seems low if the gauges are working correctly. I have run the boat 30+ hrs over the summer & used 1/4 of main (300)gal I haven't toped it off because I may pull the boat to install a new transducer before we head out & I didn't want the extra weight in the hull.
I will know my shop schedule next week....
-
Re: Runnig out of time
Paul,
What size props??? I do 9.5 at 1150-1200. I have 24X23 4 blades. At 2000 I'm on plane....18+
Same boat just TI's and i do not think that would be a big difference.Last edited by rwappleton; 09-27-2013 at 02:41 PM.
-
09-27-2013 03:06 PM #18Senior Member
- Join Date
- Jun 2005
- Posts
- 2,442
Re: Runnig out of time
I have 24X24 props...
I now do 8+ kts at 1200 rpm, 12 kts at 1800 rpm and 14 @ 2150 rpm.. BUT we are liveaboards and have a LOT of stuff onboard...
At seatrial when we bought it, got 18 kts at 2150... But it's not fun running at that speed.
We like 8 kts at 5 gph speeds..
-
09-28-2013 01:50 PM #19Senior Member
- Join Date
- Mar 2013
- Posts
- 160
Re: Runnig out of time
Survey said 24 ~ 24 4 blade , I didn't check them myself, just didn't think of it. I know they were just redone by the PO before he gave it back . Do you have the 671n"s ? I will look into new wheels 24~23 , that sounds like a huge difference in the same boat.
I spent most of the summer @ 1450 @ 9.5k - the marina had a barnical outbreak(more than usual ) , the boat didn't seem to get on plane, Just a great big PLOW - Slug. makes me wonder if it could have a critter issue. I'm leaning on pulling it before we leave to install a new airman 260 transducer.
I'm still in the beginning of the learning process of this boat. if this boat can run 20k @2400 I would absolutely buy some new wheels & keep the one on the boat as spares.
-
09-28-2013 08:37 PM #20Senior Member
- Join Date
- Jun 2005
- Posts
- 2,442
Re: Runnig out of time
6-71N's....Nice and basic motors