Folks:
Is anyone running now or in the past Hatts with 8V-92 engines? I am looking at a late 80s Hatt that has these and have heard via Yacht Club and boatyard grapevine mixed reviews of these engines.
I am looking at a MY not a sportfish and thus the engines are not that juiced up (still rated at 720 hp each). I would appreciate feedback on these engines and any stats on fuel burn if you have them.
Thanks in advance.
Spin
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 15
-
06-12-2012 11:54 PM #1
Senior Member
- Join Date
- Mar 2006
- Posts
- 338
Experience with 8V-92 Detroit diesels
-
Re: Experience with 8V-92 Detroit diesels
I have 8 92's and have been running them for the last 13 years or so. I like the engines but mine are only rated at 650 hp. 720 is getting up there for these engines. I needed to major both of mine at about 2,000 hours which I understand is fairly common. My fuel burn is 50 gph at 175 off of the pins and 25 gph at 1500 rpms. This information is from a 56 MY.
-
06-13-2012 09:47 PM #3
Senior Member
- Join Date
- Mar 2006
- Posts
- 338
Re: Experience with 8V-92 Detroit diesels
Dear JLR
Thank you for feedback. What type of speed are you achieving at those two RPM settings.
Thanks
Spin
-
Re: Experience with 8V-92 Detroit diesels
Biggest issue with the 8v92s is the turbos -- the design is weak in the housing section and you need to make sure the exhaust is properly-supported so it doesn't load the turbo housings. If you don't the exhaust-side seals will get broken and then you get soot ingestion into the engines, which is extremely damaging in a big hurry.
Other than that the usual "gotcha" for high-horsepower Detroits is overheating. Diesels in general are VERY intolerant of overheats and marine DD turbo engines are marginal in their cooling capacity. If you're in a year-round boating area (no-freeze conditions) consider running distilled water + DD-approved inhibitors instead of coolant as that will give you 7-10% more heat transport capacity, which is a big improvement. This is a DD-approved option; it's not "back yard mechanic" stuff. Keep the coolers clean. Do not let the engines go over 185F -- period -- if you start to see temperature creep problems find out what's going on and FIX IT IMMEDIATELY.
And as with all engines, make sure you're not overloaded (that you can turn up 2350 at WOT, etc.)
I like DDs in general but the 8vs at 720HP are pretty high-strung and as such very intolerant of anything being out of sorts.http://www.denninger.net - Home page with blog links and more
http://market-ticker.org - The Market Ticker
-
06-14-2012 12:15 AM #5
Senior Member
- Join Date
- Mar 2006
- Posts
- 338
Re: Experience with 8V-92 Detroit diesels
Genesis
Thanks for the feedback. My inclination is to find a good boat (and despite all logic) re-power. I have already spoken to a friend who is a CAT dealer (who by the way says from a cost sense not to repower) and have a general number for going with C 15 Acert engines.
The end result if handled by a top yard should be very good.. expensive but much less than buying a new boat.
Spin
-
Re: Experience with 8V-92 Detroit diesels
At those rpms, I cruise at 15.5-16 kts and at 1500 rpms I am doing about 10 kts.
-
Re: Experience with 8V-92 Detroit diesels
As you say, from the economic point of view this makes no sense at all. From the boating point of view, it makes eminent sense- the boat will go faster, use less fuel, be easier to service, and run with less noise. You might look at M11s as well, and compare prices.
-
Re: Experience with 8V-92 Detroit diesels
I'm a Cummins fan all things being equal, but the newer CATs are nice too. Much depends on local support in your area in terms of warranty and such.
The newer engines make absolutely zero economic sense when looking analytically at the issue (repowering) for a recreational user, even if you use the boat a lot, but in terms of social issues (noise, smoke, etc) and personal enjoyment it may still make sense to do it if you intend to keep the boat. Just beware that if/when you go to sell while the repower will make a difference in value you won't recover anywhere near the fraction of the cost you probably think you will.
I looked at putting M11s in Gigabite when I owned her and decided against it. Had fuel not gone nuts and the marinas in the area not become too hostile for me to put up with their crap any more I'd probably still own the boat and would have probably done it. As it sits I'm glad I didn't but only because I sold and while it would have made the boat more desirable (by a lot!) on the market it wouldn't have resulted in me recovering enough of the cost to be worthwhile.http://www.denninger.net - Home page with blog links and more
http://market-ticker.org - The Market Ticker
-
06-14-2012 09:59 AM #9
Senior Member
- Join Date
- Oct 2007
- Posts
- 817
Re: Experience with 8V-92 Detroit diesels
I have the 735HP 8V92's in BUFFALO GAL. Like you I had heard some negative things about these engines, particularly the high horsepower versions, so I commissioned a complete survey of both engines before buying the boat.
The engines had approxinmately 2300 hours on them at survey. The owner I was buying the boat from had run the boat very easy and had performed excellent maintenance, however there were no records prior to his purchase of the boat with approximately 1300 hours on the engines. The survey came back very strong. In fact, there was very little wear on the cyslinder liners or rings. I think as others have said here that the reliability of these engines is almost entirely dependent upon how the boat was run and what kind of maintenance schedule was performed. A quality survey by a qualified diesel engine surveyor is, in my opinion, a must. The couple thousand dollars you will spend on the survey is worth every penny.
Most of my cruising is on the AICW and inland rivers, so I am running at 9-10 knots 90% of the time. I do try to find a way to push it up to 2300 for a few minutes every day or so to get the turbos going and clear them out. When I do that, I generally get a pretty good puff of smoke out the exhaust for the first few seconds, then the exhaust clears up. I have had to re-build one turbo
that was "slobbering" (nice diesel term), but other than that only routine maintenance in the 300 hours we have put on the engines.
I don't see where you specified what boat you're looking at. BUFFALO GAL is the wide body 54MY. At 1250 RPM's she does approximately 9 knots and burns about 1.00 gal/statute mile. I haven't run enough at 2300 to know the exact burn, but she does manage 19 knots at that RPM and I expect the consumption to be about 3 gal/statute mile, not bad for an 80,000lb. boat.
At the end of the day, I wouldn't shy away from a boat I liked just because it has these engines. How the engines were run and what kind of maintenance they received is the most reliable indicator of how much life you can expect from them. A good engine surveyor can tell you that.Bill Root, USCG 100 Ton Master, Near Coastal
MV BUFFALO GAL
1988 54' MY
-
06-14-2012 01:41 PM #10
Re: Experience with 8V-92 Detroit diesels
My experience is almost exactly the same as Bill's.
Bill
Brickell - Miami, Fl
Cape Elizabeth, Maine