Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
Closed Thread
Results 21 to 30 of 32
Thread: Cruisair Amerage Draw
-
Re: Cruisair Amerage Draw
-
Re: Cruisair Amerage Draw
Boatnut - once again, a puerile response devoid of substance but filled with bile and hot air. As usual, your acerbic tone lends more heat than light to the question posed. Then again, you do prove the old adage true--there are more asses in the world than there are horses.
-
03-27-2024 07:27 PM #23Registered Member
- Join Date
- May 2023
- Posts
- 39
Re: Cruisair Amerage Draw
hey guys, this may be the wrong thread, but what would the normal start draw be and what's the normal run draw on a 24kbtu?
and on a 10kbtu
and a 5k btu
and a 16k btu
Lol That's all the systems I have and I can't find the info anywhere... this thread shows up over and over no matter what I search.
-
-
03-28-2024 07:56 AM #25
Re: Cruisair Amerage Draw
Mike is dead on - This was always my first stop with Pau Hana and issues I ran into, as well as sharing something I did that worked (yes, sometimes it happened). I came here first for Crusair issues, even though in my case ripping out the units turned out to be the solution.
"A smooth sea never made a skillful sailor"
Rob Waldrop
M/V Pau Hana
Ft Myers FL
-
03-28-2024 07:58 AM #26
-
03-28-2024 08:23 AM #27Senior Member
- Join Date
- Nov 2006
- Posts
- 146
-
-
Re: Cruisair Amerage Draw
Last edited by SKYCHENEY; 03-28-2024 at 03:00 PM.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
03-28-2024 02:18 PM #30