Do any of you know the OD of the cutlass bearings (or ID of the struts) for a 2" shaft on a 58 YF? Paxton shows a 2-5/8" OD and a 3" OD for this shaft. Just thinking about diving the boat in our 37 deg water causes way too much "shrinkage"!
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 19
Thread: Cutlass bearing size?
-
Cutlass bearing size?
Michael & Cindy Ewing
Southern Comfort, 1977 Hatteras 58YF
Tidewater Yacht Marina
Portsmouth, VA
-
Re: Cutlass bearing size?
They are "CALL" at 2 5/8"
Sams has them but I think I bought mine from Deep Blue last time.Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
-
Re: Cutlass bearing size?
Always measure after removal if replacing unless you know they have never been worked on...
-
Re: Cutlass bearing size?
Thanks guys for the information/advice. Is there anything different (size, removal, installation, etc.) I should know about the cutlass bearing in the shaft alley, just behind the packing gland?
Michael & Cindy Ewing
Southern Comfort, 1977 Hatteras 58YF
Tidewater Yacht Marina
Portsmouth, VA
-
Re: Cutlass bearing size?
The're isnt a bearing in the shaft log. Only in the struts. You going to do this yourself?
"DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN
Endless Summer
1967 50c 12/71n DDA 525hp
ex Miss Betsy
owners:
Howard P. Miller 1967-1974
Richard F Hull 1974-1976
Robert J. & R.Scott Smith 1976-present
-
01-05-2011 08:06 AM #7
Re: Cutlass bearing size?
I think he means the forward strut as pictured on my 56.
As you can see, in my case it would take a different length.George
Former Owner: "Incentive" 1981 56MY
2007-2014
-
Re: Cutlass bearing size?
Actually, I don't have a forward strut, only an "intermediate" (yes, seems like a contradiction) and the V-strut just forward of the prop. The shaft coupling is between these two struts, both of which appear to have the same length cutlass bearings. Several years ago I replaced these four bearings myself and I guess there may not be another cutlass bearing where the shaft penetrates the hull, but rather just the packing gland inside the hull.
Michael & Cindy Ewing
Southern Comfort, 1977 Hatteras 58YF
Tidewater Yacht Marina
Portsmouth, VA
-
01-05-2011 08:52 AM #9Senior Member
- Join Date
- May 2010
- Posts
- 60
Re: Cutlass bearing size?
The 1510 X 58s do have a bearing in the shaft logs. The two struts are the same size and the log bearing has a larger (1/4"?) OD. rebel
http://www.deepblueyachtsupply.com/c...sbearings.aspx
These guys are the best!Last edited by REBEL; 01-05-2011 at 08:58 AM.
-
Re: Cutlass bearing size?
Thanks Rebel. Great pics. Guess I'll wait until the boat has been hauled before ordering the shaft log bearing.
Michael & Cindy Ewing
Southern Comfort, 1977 Hatteras 58YF
Tidewater Yacht Marina
Portsmouth, VA