Looking for the boot that seals the windshield wiper rotating shaft at the wiper arm end. Take a look at this link to the part in Sam's catalog. A picture is worth a thousand words. http://www.samsmarine.com/PartSearch...emNmbr=S78052C
This is the 5/16 shaft seal. There are also 3/8 shafts that were used. Not sure of the application of each. Would like to find three new ones. Steve searched all his sources for me, and the result was only available as a part in the shaft replacement kit at $60+ each. $60 for a boot did not "spell check" with my brain. Would appreciate any leads.
Pete
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 2 of 2
Thread: Windshield Wiper Shaft Seal
-
11-22-2009 05:25 PM #1Senior Member
- Join Date
- Apr 2005
- Posts
- 1,162
Windshield Wiper Shaft Seal
-
Re: Windshield Wiper Shaft Seal
Go JUNKING!!! Most of the conventional boats use a small stainless steel plate held down with two small screws and an O ring to seal the shaft. Sometimes Ford does have a better idea LOL... ws
yachtsmanWILLY
I used to think I knew everything until I found the experts HERE; Now I know I dont know SQUAT
www.flybridge.proboards.com
Uncensored, no nonsense boating fun for adults