2" Aquamet shafts for 45' Convertable and other stuff

[George]

I'm currently repowering and have several items which may be of interest to 45' Hatteras owners
2" Aquamet Shafts, 1 has less then 100 hrs of use
Bronze Stuffing boxes for 2" shafts
Bronze Perco raw water strainers excellent shape
Glendenning Syncronizer

E-mail if interested
George.Robinson@Ottens.com

[Danolywa]

What motors do you have in your vessel that you are replacing?? What do you want for the Glenndening synchronizer's

[Chrisibyl]

I am going to repower a 36C with 1 3/4 shafts and should go bigger for a better safety factor.

What is the price on the 2" shafts and the other parts?

[tomfishn]

Hi, What do you want for the Glendinning. Please email me tomc@tidewaterac.com Thankyou ,Tom

[George]

Glendinning $500
2" Aquamet 22 shafts $1000.00 for both including stuffing boxes, excluding stern tubes which you should make new anyway
Sea Strainers approx 7" X 12" $250 for both

[Chrisibyl]

What is the overall length of the 2" shafts and what city are you in?

[George]

The shaft is 2" X 153" Double Taper, spooned, along with Key & nuts

[George]

Forgot, The shafts are located in Cape May NJ.

[oceanmaster]

if you have 36 struts for 1.75 shafts, and would like to sell them please contact me at oceansports1@aol,com thanks, Mike