Printable View
my owners manuel for my 1972 58yf has a step light listed as one of the items on my port 32v circuit breaker. where should this light be located?, where is the switch? was it an option that the first owner declined? my boat doesn't have any lights on the steps. thanks , bigbill
Really, your boat came with a little spanish guy named manuel. oh i guess you mean manual as in owners manual, i do like the idea though of an owners manuel.
just a little fun. seriously, what does the specific hull wiring schematic list. it should show every thing running off that breaker. say hi to Manuel.
What about the spiral stairs from the PH to the galley? I have lights in each of those steps. There is a 3 way switch on the wall in the galley and another at the top of the stairs in the PH.
Thats interesting... I have a switch in the galley cluster but no 32 vdc socket in the overhead light, but I am missing a stair light; just a hole there now Another FM ! ws
YB,
I had both 32v and 110v switches to my galley lights, but the PO rewired them to all 110v. I switched them back so that I have both 32v and 110v bulbs in each fixture.
Is that the new socket job you did last winter? I have an incandescent galley light and another over the table and both are only 110 vac. Sure could use a DC unit there. I pulled the switch back out and the wires are gone too. Hmm ws
No, the galley fixtures were OEM dual voltage but bubba had a better idea (kinda like Ford). The job I did last winter was to add 110v bulbs in the 32v fixtures in the salon. Originally I had 2 that were only 32v and 2 that were only 110v. Now I have all 4 that run 110v and still have the ability to run 2 off of 32v when needed.
Now I get it!! Thats when you pulled the headliner down no? Hopefully my bubba left the wires in situ. ws