3 Attachment(s)
Capilano Hydraulic Cylinder - Rebuild?
My steering has become very sluggish. I had bled the system and topped off the hydraulic fluid a few weeks ago. The steering was better but far from optimum.
I have noticed a small leak at the lower helm and thought that might be the problem. However, it appears I have more than one issue.
Systems Consists of the following:- Lower/Upper Helm Unit - Capilano Model 275
- Steering Hydraulic Pump - Accusteer Model HRP-75-24
- Capilano Hydraulic Cylinder - No nameplate or data
- Teleflex Model 50 Uniflow Valve
I have leaks in the following locations:- Lower Helm Unit - Minor
- Port Hydraulic Cylinder - Moderate
- Uniflow Valve - Moderate (Appears to be from fittings)
Want to get the system back to optimum operation. How difficult is it to rebuild the helm unit and the hydraulic cylinder?? I could not find the exact replacement for my hydraulic cylinder as there is no nameplate on either one of them. Additionally, it appears the connections are rather unique. The units I did find for inboard engines were about $1200.... would prefer a more economical solution.
Any input will be appreciated.
Thanks!
Attachment 61674Attachment 61675Attachment 61676
3 Attachment(s)
Re: Capilano Hydraulic Cylinder - Rebuild?
Re: Capilano Hydraulic Cylinder - Rebuild?
Is it the hose / tubing fittings leaking or the helm pumps?
Have you properly bleed the system?
Some Capilano helms had a variable ratio knob or shaft. Adjustment in the wrong direction would lower the movement of the rudder making the operator think there was a problem.
Never kick a sleeping dog.
Ensure you have a problem before taking anything apart. Especially these.
Re: Capilano Hydraulic Cylinder - Rebuild?
Capt-
On the lower helm, the leak appears to be coming from the seal around the wheel shaft. I get a small amount of fluid that "runs" down the vertical part of the helm.
On the Uniflow valve, it could very well be the fittings and I will be removing, cleaning and use Leak Lock on the NPT threads.
I just remember seeing hydraulic fluid below the cylinder on my trip down from Chesapeake. I did not check the fittings... will do that first....
I definitely bled the system correctly when I did it in Charleston... at least I "think" I did... talked to the Capilano tech support and followed the procedure in the manual they provided.
1 Attachment(s)
Re: Capilano Hydraulic Cylinder - Rebuild?
You can see here is this pic the residual oil on the vertical part of the helm...
Attachment 61685
Re: Capilano Hydraulic Cylinder - Rebuild?
In your pic is also the ratio knob.
If you are already in contact with the mfg support, They may have a local shop to reseal the unit, maybe come on site and do all the dirty work for you.
I would not be in a hurry to replace anything, just serviced what is needed.
Re: Capilano Hydraulic Cylinder - Rebuild?
I believe I have the exact same setup on Katerina.
No issues at this time, but she did seep fluid from the upper station when we first bought her. I believe the mechanic that serviced the hoses at the steering cylinder, didn't bleed the system fully and bubbles were "burping" out the vent.
Interestingly, I never noticed the little knob in your last picture. I just went to check and there is one on both helms. The lower helm has a wooden wheel, so you really have to get to the side to even notice the knob.
What exactly does the variable ratio knob do? Is this a way to adjust the sensitivity of the rudders to wheel turn? If so, I wouldn't mind making them more reactive to the helm.
Re: Capilano Hydraulic Cylinder - Rebuild?
Quote:
Originally Posted by
zigzag930
What exactly does the variable ratio knob do? Is this a way to adjust the sensitivity of the rudders to wheel turn? If so, I wouldn't mind making them more reactive to the helm.
Think of it as a variable transmission.
Easy to turn, rudder moves a little per turn, it gets harder to turn if you want the rudders to move faster/quicker per steering wheel turn. This does nothing for the AP pump, just the help pump.
Don't think it came with power steering, like Hatts Hynautic nightmare.
Wait, did Sea Star buy up Capilano also? Now Dumbmetic?
Trying to find a manual for you.
http://www.seastarsolutions.com/prod...lano-new/#tech
Re: Capilano Hydraulic Cylinder - Rebuild?
Quote:
Originally Posted by
zigzag930
I believe I have the exact same setup on Katerina.
What exactly does the variable ratio knob do? Is this a way to adjust the sensitivity of the rudders to wheel turn? If so, I wouldn't mind making them more reactive to the helm.
Yes.... exactly.... if you look close it has an engraving that says "More Turns" ... and "Less Turns"...
Re: Capilano Hydraulic Cylinder - Rebuild?
Quote:
Originally Posted by
Captain Ralph
In your pic is also the ratio knob.
If you are already in contact with the mfg support, They may have a local shop to reseal the unit, maybe come on site and do all the dirty work for you.
I would not be in a hurry to replace anything, just serviced what is needed.
Anyone have a recommendation for someone in the Tampa/St. Pete/Sarasota area?
Thanks!