Printable View
I'm trying to get the specs for the props on my 46 Hatteras but am having no joy when I Google the numbers that are stamped into the hubs. I'm not sure if they are part #'s, serial #'s or ??? They are the only numbers that I could find on the props. Is it possible to get the specs based on these?
Attachment 23164Attachment 23165
Look at the hub between the blades. Should be a number(the diameter) then an (x) then another two digit number (the pitch)
Ok, I never thought to look there. In this picture I can see what appears to be some numbers between the blades. Just can't quite make them out though.
Attachment 23168
Guess I'll have to wait until I'm back at the boat this weekend.
Thanks. At least I know where to look now.
Take a small brush or wire brush to clean the area sometimes this helps to see the numbers. If the prop is very old you may never be able to read them. You might also try some of the prop makers like Michigan Wheel and give them the other set of numbers that are there and they may be able to convert them to a dia and pitch. This does not guarantee that they have not been repitched at some time. John