Clear vinyl/plastic rub rail water diverter
Happy New Years All,
Does anyone know where I can locate the water diverters (clear vinyl) used by Viking & the new Betrams in lieu have having someone make them for me. They shed the water off the deck/covering boards from the rub rail to eliminate the water streaks along the hull side at cockpit sheer.
Best,
Re: Clear vinyl/plastic rub rail water diverter
Any marine upholstery shop will probably give you a scrap piece of clear material they have lying around that you can use to cut out the sizes you need. That is how Viking and other manufacturers do it.
Re: Clear vinyl/plastic rub rail water diverter
Too funny you posted this when you did. I just dropped mine off at Cesany Plastics in Ft. Lauderdale to be made yesterday. The current ones were a little short and allowing water to dribble down the side wall and puddling in the tracks of my aft deck sliding windows, which of course created a very expensive fix in the stateroom underneath. Long story and a new to us boat. Not sure of the cost to have made but I had to no choice. This is the company Sam's uses to make the Hatteras diverters.
Re: Clear vinyl/plastic rub rail water diverter
After rereading your post I wonder if I misunderstood. On my previous boat stiff isinglass was tucked under loosened screws along the rub-rail at the drain gaps then re-secured by tightening previously loosened screws.
Re: Clear vinyl/plastic rub rail water diverter
Hmmm... I have the same problem at the break in the sheer- water runs down the hull side and stains it. This is a good idea.
Re: Clear vinyl/plastic rub rail water diverter
Can you guys post a pic or two?
1 Attachment(s)
Re: Clear vinyl/plastic rub rail water diverter
Is this what you’re looking for? If so Sam’s sells them.
Re: Clear vinyl/plastic rub rail water diverter
Thank you guys, Seven I could not open your attachment, however I will check the Sams parts right now.
Re: Clear vinyl/plastic rub rail water diverter
Sams:
Sheer drip guard 2" x 26" part # 29484e $16.95 each
Re: Clear vinyl/plastic rub rail water diverter
That’s the one. Let me know how it works. I’m considering adding them myself.