37C Cutlass Bearing Advice
Working on the running gear yesterday and noticed that a rubber sleeve from what I assume is a cutlass bearing, behind the stuffing box at the thru hull has worked back exposing 1.5" of the rubber. Does anyone have experience replacing this part? I assume it is a cutlass bearing. Is it the same size as the one in the strut? I have to remove the shaft and pull it from the outside? Can't leave it alone can I?
Love to know the dimensions and part #. Of course I notice this now!
Any help is very appreciated. Hal
3 Attachment(s)
Re: 37C Cutlass Bearing Advice
Re: 37C Cutlass Bearing Advice
Pull the shaft. Pull the set screws and replace it.
While your at it change the stuffing box hoses and clamps. It's the same labor to pull the shafts for the cutlass bearings as it is for the stuffing boxes.
Re: 37C Cutlass Bearing Advice
How do they get water to the cutlass bearing to lubricate it?
Re: 37C Cutlass Bearing Advice
There is a small hose that runs from the raw water intake to the flange. In the past I have forgotten about that and sent a lot of antifreeze on the ground when winterizing!
Re: 37C Cutlass Bearing Advice
SAMS will have the bearing. In my case, you cut a shaft bearing in two. My 48 has no lubrication for the rudder shafts. That shaft rotates very slowly and doesn't need it.
Bobk
2 Attachment(s)
Re: 37C Cutlass Bearing Advice
These old Hatts are a learning experience. Good thing Sam's is here.
FWIW I have learned that this Bearing,1 3/4 X2 3/8 x 7":
Attachment 17866
Fits in this Strut Recessed Port 1 3/4 ID Bearing CMC-3:
Attachment 17867
All 7" of it.
Given that I wonder how critical it is that I replace it immediately!
H
Re: 37C Cutlass Bearing Advice
Keep running it. Maybe it will fix itself. :D
1 Attachment(s)
Re: 37C Cutlass Bearing Advice
Here's a pic of a simple puller I made to get the front coupling off if you decide to do the job.
Attachment 17868
Re: 37C Cutlass Bearing Advice
Quote:
Originally Posted by
hcalmar
These old Hatts are a learning experience. Good thing Sam's is here.
FWIW I have learned that this Bearing,1 3/4 X2 3/8 x 7":
Attachment 17866
Fits in this Strut Recessed Port 1 3/4 ID Bearing CMC-3:
Attachment 17867
All 7" of it.
Given that I wonder how critical it is that I replace it immediately!
H
Like the cardiologist that said don't hurry to get the triple bypass. We can do a quadruple next year if you live that long.
Scroddy you need a better emoticon for sarcasm.