I want to have a proper place to primarily store my large long fenders. On floating docks, I have the 36" round fenders that I deploy hanging from the rail. My home slip is a floating dock so these are the ones that are deployed most often. I also have four 12" diameter x 36" long fenders that...

One of my copper fuel line recently cracked where someone had put a bad bend inside a sweeping 90. It's a short piece between a fuel shutoff and the fuel filter about 25". Question is, where does one find 5/8" od soft copper line?

I’ve found a really nice 1998 74 with Cats that I can buy for $575k, but I do not want to be over 70ft. What are my options for staying under 70 and having 4 cabins. Looking to be sub $600k. I would also consider older boats if they’ve had a complete refit.

Can you eliminate a synchronizer when replacing throttle cables?

Bought one of these today The box included 2 chip cards but l can only fins a slot for the smaller one in the unit I gather I have to uplift the. Charts to the mfd Do l need to call in a pro or is it doable by an amateur If so how

I should have started this project earlier this winter, but it's now underway. I am pulling out my Vacuflush system and installing Raritan Marine Elegance Toilets and all new hoses and etc. I have a few questions. 1. Vent line is 1 1/4, what is the recommended hose since it's not a common size?...

I am replacing my shower flanges and connected drain hoses. The current hose is a 1 1/2 gray hose with cuffs on the end for clamping. What do you guys use/like. I plan to do my bilge pump hoses themselves next, so buying in bulk be advantageous. Thanks for any replies and comments.