I have Racor primary filters on both the engines and the genny. I've been buying the same fuel filters for my primaries that were on the boat when I got her. But, what SHOULD I be using? The engines have 30 micron in them while the genny has 2 micron in it. We go through a lot of filters on...

The current temp sender does not work with the new gauges. The current senders have a thread diameter of 13/16 (from the edge of one thread to the edge of thread on the other side) but I can not find any VDO senders of that size, even the ones that come with extra bushings to fit different...

I have some separation on the marble-looking countertop with the integrated sink on my 41C - apparently some acidic something spilled on the countertop and in the sink bowl in an earlier life and corroded a hole in it and in other places it appears to be delaminating from its' plaster looking base....

Had the original house water pump rebuilt (I think a Groco 32V) and the rebuilders rewound the motor to 32 amps, then 25 amps (I think it wants to be 15 amps). After the 32 wind the pump was kicking the breaker. After the 25 wind same thing. Supposedly they're rewinding to 15 now. Am I missing...

I Have just bought a 1971 Hatteras 38 convertiable and I want to ship it buy ground freight. On inspection of the Flybridge it seems as though it is not only screwed on but also looks glued as well. I was wondering if anyone had removed a flybridge from one of these vessels before ( even other...

I have a lectra san that was new about a year and a half ago, and it works great. However, when under way the water level in the bowl rises a couple of inches along with some odor. Reflush and it's ok for a while. Any suggestions.

Anchored out this weekend and used my windlass for first time. It is a verticle Ideal Windlass. I laid out a good 100' of rode and when cranking it back in, the top part of the windlass (the part for line rode) would spin at a constant speed....the part of the windlass where I had the chain rode...

I currently have Hagerty insurance and the premium just went up 20% in one year. Do you have any recommendations for affordable insurance on older boats?

I am looking for Transmission mounts. We have talked to Sams and they know what I need but dont have any avail at this time. If you go to his parts list and look at part number 5130234, that is what the mount looks like-but that mount is for a 4-53 Detroit. Thanks

Has anyone replaced their evaparators. Mine are the orginal --1971-- They say they 2 leak freon-at the flare fittings- Can they be fixed or should they be replaced... Also have one bad compressor, and a 5 year New Cruisair unit. Thanks, Ken