I have a '85 43MY and want to add a freah water washdown on the aft deck. Has anyone added one and were did you put it? Pictures please. Thanks for any and all help! Jack

Anyone know where I can get a replacement solenoid for my Raritan Crown Head? Its the Aft head on a 1973 43 Hatt DC. The Solenoid is located right behind the Delta Marine push buttons. I think the head draws 32-36 amps and I think it has 4 terminals. Thanks, Captnrick

We have a 1984 53 Hatteras classic,it has 50 amp/250V services and one 50 amp/125 V,what would you need to adapted down to a 30 amp shore power service,via the 125V plug . Thanks,Phil

Anybody have any idea why my starboard gear oil pressure indicator will now and again peg high as it can go? 1990 41C with 3208's with I think 2.1 gears. The port gear always stays around 270lb (or 3/4 to the max) which I understand is typically high. It is the stb gear that now and again...

We're considering shipping a 1987 41' double cabin and wondering if anyone out there has had experience or could suggest whether or not the boat can be shipped through ground transportation recognizing the radar arch must come off, but does the f/b have to be removed? I've been told I have a...

I have a 53MY, used in both fresh water and salt water and 5 year old bottom paint. We just put 6,000 miles on her doing the Great Loop, so it's past time to do a bottom paint job. I believe that the current bottom paint is the ablative type because when you scratch it with a fingernail you get a...

I have a 46C with an '89 vintage Robertson Auto pilot. It has an AP250 control unit, N200 nav unit, NFC 200 fluxgate compass, and an RPU100 hydraulic pump. About a year ago, the N200 broke, too expensive to fix so I just unplugged it from the system. Yesterday at the beginning of a 65 mile...

Hello All There have been a few threads about gauges so I thought I would pass this along I got tired of the $75 oil pressure senders and the expensive and hard to find original OEM AC guages. I'm replacing with Teleflex (heavy duty line) They are very similiar in look to the AC guages not exact...

Where do you get new curved plastic windows for a 61' cmy, I want to replace one of mine ?? What should the new window be bedded with? Do you use the shims in the plastic windows??..........Pat

Does anyone on the board know what type of resin was used in tanks built circa 1971. More specifically, from a 1971 36' Sportfish (gasser). I am having the fuel tested for resin and I'm certain that the lab may ask the question. I know it's a polyester resin but I am told that there were certain...