Planning to bring a 40' hatteras through the NYS barge canal. Hatteras specs say 15'2" clearance to top of radar arch. 2 bridges (Canandaigua and Lock 30 cable bridge indicate 15'6" clearance. On paper that's only 4 inches and water levels could change that. Has anyone with a 40 made this trip...

Dual unit Cruisair vintage 1968. Last weekend while I was crawling out of the engine room I smelled electrical smoke. Looking to my left I saw a wire from the electrical box on the dual unit Cruisair burning. After yelling to the Admiral to quickly turn off the AC the wire stopped burning. In...

I’m wondering if Peroxide rather than Chlorox might be a better/safer chemical to use in our water tanks to kill bacteria. I do know that Chlorox contains so much chlorine that it will deform and/or destroy anything made of rubber. I used those Chlorox toilet tank tablets at home and they...

Hello. Where would one find this product,and is there another product I could use in its place ?,and PS,what system is ist added to ? Thanks,Phil

I started my genny for the first time in a while today and noticed that it wan't pumping out cooling water, just exhaust. The belt was fine, and the pulley was turning. When I pulled the water inlet hose off the strainer, I was quite surprised to see what appears to be exhaust blowing out the...

I can't recall if I have mentioned this, so if I have, forgive me: As part of the repower of Blue Note, I asked BoatUS to raise her agreed-value, bearing in mind that I had spent quite a lot of money on her repower and associated improvements. Before the repower, she was assessed at $120K. Since...

Anyone replace their rub rail on a 43 DC? It looks pretty straight forward but was wondering if there were any tips / tricks? Thanks.

The broker told me the leak on the headliner halfway back on the stbd side in the salon was the result of a leaking washer hose for the windshield wiper. Where does this hose run to to get the fluid and does anyone know if there is a coupler or a joint up there anywhere?

I have a 1972 38 ft C that has two 8V53s that had been pull outs from a repower. I don;t have any info on them, not even HP and hoped to find a serial number somewhere. We have looked and looked to know avail. Does anyone know where to expect to find the serial numbers? Thanks, Dave...

I can not find any marine gaskets for my 426 Max Wedge engines. I need 2 sets of head gaskets, 2 intake, and 2 exhaust manifold gaskets... Any help/ tips?