I have 2 shore power cables connected to each starboard 50a 125v recepticals. I can now power all of the 110v service but cannot power the 220v panel (water heater and stove ect). I looked at the 110v/220v schematic and I see two lines coming from the 110v pannel to the 220v panel. I assumed that...

Just wondering if anyone else has had the knuckle-headed pleasure of over torque-ing and ruining the outer bezel nuts to the original key switches. If so, does Sam's or anyone else sell just the outer Bezel or am i going for new switches? Is there a 3rd option i"m not thinking of?

I need to stock up, 32 volt in both 40 watt and 75 watt, standard base. Anyone have a suggestion on where to get them at a decent price?

This maybe a silly question or thought but... My son and I were talking about fuel consumption and how to get the most bang for your fuel buck. He asked would it help if we removed the mufflers from the exhaust system and let the engines 'breathe' easier? Hmmm - sounds like a good idea, don't...

Does anyone know the recommended fuse size for a 12 volt regulator solenoid? tx john

a friend took exception to my wiring of the inverter case ground. i believe i have it right. the xantrex manual states it should be grounded to the boats ground point so i have run the cable to the starboard engine negative lug. he says it should go directly to the ground plane. my genset is...

Does anyone know how the large stantions that run straight up from the floor to the hardtop at the after end of the bridge deck side windows are fastened through the floor? Are there nuts on the underside, a metal plate that's threaded to receive the bolts, or what? I'm chasing a leak in the aft...

The thread on Shore Power got me thinking about a problem I have had with occasionally blowing shore power fuzes. The mechanic says I am using the wrong procedure to hook up shore power. Basically, I close the shore breaker last on the pier to bring power aboard. Is that the correct way to do it?...