Is there any reason to use RAZ Marine over just sending my pumps back to Galley Maid for a rebuild? One pump leaks and the other just hums. I don't really want to rebuild them myself but I would if I thought I could be successful doing it. What are your experiences? Thanks,

Hi, I am new owner of Buffalo Gal, 1988 54 MY. Boat is now in New Zealand. Has been on mooring for about 4 weeks and batteries are dead! Question is how do I get out of this fix. Onan 20 Gen doesn't have dedicated start batteries and I don't think it charges main batteries anyway. Just the engines...

I’m thinking about removing the mast from the front of my 43 DCFB. Where do you have your white lights located? I don’t want to reinvent the wheel here.

Anyone know if the "paddle" type trim tab switches are still available? I believe they are 24vdc. Thanks!

I recently had my 671 TIs rebuilt Then the pistons were all recalled and had to be replaced due to bad slip bearings in the piston One engine only had 6 hours on it since the rebuild but the 12 month rebuild warranty had expired Upon dropping the pan to replace the pistons the tech noticed that...

I have a 2000 55' Hatteras sportfish with zf mathers clearcommand and a pair of CAT 3412-e. Twice recently, while having control at my bridge station (tournament-style control heads 512-1s) and idling in neutral at the dock, my starboard side has shifted into reverse on it's own. I had a...

On my 1981 53 my the holding tank vent line appears blocked as it is hard to pump out I have put a hose on the outside vent through hull but water is not reaching the tank My question is what does the vent line hose look like at the tank and where does it enter the tank Also should water from a...