I've read through some of the older threads and posts and replacing shift cables is a job others have undertaken themselves. I have a 43C with 6V92's and "Steve" at Sam's has advised that I require a 24 ft. and a 28 ft. cable. Now----does anybody have a ballpark estimate on the time actually...

Hi everyone, Friend suggested I come ask the DD experts here at Hatteras. I am looking at a 1989, 53' boat that have a pair of DD 6V92Ts. Total HP 480. I do not know much about these engines although I have found that they are 2-stroke, turbo and can be re-sleeved. I was also told they are...

Anybody got a clever solution for driving in the front crankshaft seals on an 871? I don't want to try tapping around the perimeter and distort it. The 'drivable' surface on the seal is between 3-1/4 to 3-3/8 and the driver need to be about 5" deep to go over the crank snout. Thought about 3"...

Hope y'all can help. I have two closet bulbs out that need replacing. I can't get to the boat until next weekend and would like to get them ordered. These are the long skinny bulbs, maybe 4-5" long and were the OEM 32v variety. Anyone know of a source? Thanks!

I am thinking about putting some propeller rope cutters on my 52'c and was wondering whether i should go with the smooth blades or the serrated blades? I spoke with a gentlemen at Prop-Protector and he says they used to make their product serrated but they found over the years that often times it...

Wow, I am fired up about this. My 1985 45C would be a perfect fit. I am thinking that Hatteras would be excited for someone exactly like me to offer them my worn but beloved sportfish for some great before and after shots. I also will promise to sing their praises at any dock, anywhere, anytime,...

I have asked this question of people who know their boats and the Detroit Engines, but I am getting a different response from a respected supplier of Gear Box oil pumps. I replaced both the oil pumps for the gear boxes last year with NEW Hydreco pumps. At the time, the supplier advised me that...

Hi all, I have noticed that many vessels have on board telephone systems linking Engine room to bridge, to master sr. to galley etc, but I can't seem to find anything current on the net. (I often resort to our 'wireless system'-admiral calls it yelling- but that's not ideal). Would anyone...

Does anyone know an easy way to download the way points and routes from my 952X. I would like to be able to do so and then upload them onto my 6000i. I have had poor luck in the past trying to download and upload from the 952's and the requirement for a serial port to be able to do so. It will be a...

Doing my annual search for impellers for my 892's finding most priced between 75-95. Found this website for $53 was wondering if anybody is familiar with them? http://www.jabscoimpeller.com/jabsco-impeller-p/17936-0001-b.htm Chris Superior Nights 53C