While I can list many positives about an LRC, one of those would not be ample engine torque when docking at idle. It would be nice to have a "high idle" mode on the main engines that with the flip of a switch, maybe two switches, elevated the idle to maybe 800 or 900 RPM. So, it struck me that...

I have searched and got some familiarity from the posts here on the HOF but I'm not sure whats the next step for me. I have a 1985 45C and the symptoms on the Mansfield # 848 are that there is a small puddle of water in the bowel and when I pull out the switch to turn on the diaphragm pump...

I have a 1973 58 yatchfish with a recent water intrusiton problem from the flybridge. The water was leaking down throuh the exterior lights and eventually into the cabin. On the advise of fellow owners I resealed the bridge and re-set all of the screws. Problem fixed! I do have evidence of core...

Randy and Ryan just left this morning.They arrived a couple of days ago as I was installing our newly overhauled AC raw water pump.When we cranked the system up we had/have a low water flow and evently both compressors shut down.It will run on one and cool the bedrooms or I can run just the salon.I...

Hi, I bought a 42 lrc last summer and would want to get the ACs to work on the Genset or Shorepower, both providing 220v 50hz. As I live in Norway, no cooling should be needed, but I'ld very much like the heat they should also be able to provide. I've got the original huge blue Jefferson...

my hull number is 58yf352 it is a 1972. the government owned my boat prior to me. as you may know, the government deletes all past records on any vessel they own or seize, so i dont know much about her past, the govt. obtained her in 1992ish. during hurricane ike some of the rubrail was pulled...

To prevent further damage to my back I am looking at functional outboard engine lift/winch that can be mounted on the swim grid/platform to lower and hoist my outboard engine from the inflatable dinghy. I seem to have seen these on the web previously but cannot find them now. I have 6HP Mercury

My 9KW generator shuts down as soon as it sees a load 30-35 amps. Any suggestions?

I have a 1968 twin cabin, 41 ft Hatteras. Have tried snaking out the drain holes that allow the bilge water to flow from the stuffing boxes to the bow bilge pump. They must be plugged with greese,nuts and bolts, and whatever. I can feel my way from the stuffing box chamber forward to under the...