I'm going to try the in place phosphoric acid flush process. I've done the muriatic acid dd method a few times with no major problem. Last time was about 3 seasons ago, so I'm probably due, although my temps are fine - even out at the edge mid summer. My question is this: do you typically flush...

You guys that have Bosch dryers are yours ventless? I am looking to replace ours and all the Bosch dryers seem to be ventless and require a lot of air space around them which our boat installations do not have. A couple of others brands also are ventless. Need suggestions. Thanks John

Anyone have a reasonably priced source that will ship the milspec or other compatible fluid?

I am hauling my 53 MY next week for shaft seal dripping problrm. The previous owner had installed south eastern foundries lip seal, and the starboard side is leaking. After reading some posts on Sam’s Marine I came to the conclusion that the Duramax shaft seal carries with it dual safety measures....

Hi to all. I am going to replace my shaft seal. I have the original 1986. They have to be replace. The boat is a 52c 1986. The question is PSS pro seals or tides seal or continue with the old system. I have to decide soon. Recommendations. The boat is use in Puerto Rico rough seas. ?????

We have been having a rash of clogged drains this week which I clean with the shop vacuum, but one in particular is getting slower and slower. Even using the exhaust pressure from the vacuum has not made much difference: it drains the pan, but just barely. I don’t have access to the bottom of the...

Figured I’d tap the brain trust here. I’m in the process updating my black water system (new hoses, tank, etc) and when I pulled out the head to remove the discharge hose it appears the toilet hasn’t been out in a long time, maybe never. This is an original ‘A’ series Atlantes fresh water flush...