Well that settles it. I was contemplating replacing my solid glass bow hatch with the type that provided passive light as you have. The plan was to close up the portlights for an updated exterior look & to obtain my lost lighting from the new hatch. Never considered the solar effect...that portion...

I recently purchased a 1986 Sedan 36 with 3208T 300hp. What fuel use should I anticipate?

While I have my boat, '72, 36' Hatt. on the hill this weekend to do some trim tab work, 1 of the foreman at the yard walked by and asked what type of electrical problem that I had. I said that I wasn't aware of one, and he said that my wheels were discolored, so I had a problem somewhere. My...

I've decided to replace the generator in my 36... probably go with a 6 - 7kw unit. For, my due diligence, I was hoping for any suggestions /recommendation's or which brands best to avoid. I've heard good things about Northern Lights and seen a very reliable 8 year old Westerbeke I would drop in...

I am trying to repair a hole cut by a previous owner in the side of a closet. Hole was cut to accomodate a tv. I am looking for some 3/8" teak plywood, finished on both sides. Or, if anyone has an old cabinet door with the original finish that is at least 14 x 15", I could cut that down to fit...

My dad and I are looking at a 1968 Hatteras 41 double cabin. Both engines and transmissions are repaired and have 2 hours since the repair.The engines are 6v53's. The railing is brand new and the top is brand new too. The boat hasn't been moved like in 1 1/2 years.On the inside is the problem. Its...

I recently had my port trim tab lock in the down position, (trim tab fully extended). Since the tab is spring loaded to the "up" position, am convinced I have an air lock, and bleeding the system should correct my problem. Any advice on how to bleed the system? Cheers, Billy

i want to repower my 1966 41 TCMY. current original 653's are running hot, dirty, and very loud. i want more speed, better fuel economy, much less noise, and clean engine room. does anyone have suggestions about power and best way to remove engines from boat.

When I had my 43DC shipped the flybridge had to be removed and all associated wiring disconnected. I have the 10" Rayline searchlight and now the lower controls do not work properly. When I move the "joystick" up/down the light turns horizontally and moving the "joystick" to the left/right moves...

I have a 1982 61" Hatteras cockpit motor yacht and was wondering if anyone has any info on replacing the appliances in the galley-Stove/Oven/dishwasher? There is a size factor getting the new ones in. Any Help would be greatly appreciated. Thank