I'm going to apply propspeed this year for the first time ever. Wheels, rudders, struts, shafts. Have been using epoxy barrier coat and antifouling on struts and rudders and rustoleum zinc spray on wheels and shafts. Prop wash removes the anitfouling on a decent area of the rudders. By the end...

I’m slipped in St Augustine. Apparently my mechanic of 5 years is “getting away from detroits” and my port motor needs some attention. All the Injectors we’re replaced 20 hours ago, going to pop test those. Turbos might have 80 hours.

I have a 2002 50C which will soon need new shaft bearings. Hatteras used a waffled Thordon cutlass bearing for noise (bearing squeal at low speed?) and supposedly longer life but at double the cost. Does anyone have experience with these bearings vs standard Duramax nitrile bearings? Definitely...

Hello all, long time no post! I've got a Hynautic h-42 helm pump on my 1986 52c. My steering cylinder has started leaking (again). I've already had it rebuilt a couple times in the past but thinking I'm leaning toward replacement this time. The cylinder does not have any marking or part number...

One of my pending wishlist projects is to update / modernize the gauges at both helm stations on our boat. They still have what I assume are the original gauges, some of which don't work. In broad terms, what am I looking at in terms of the process here? Is it a simple matter of removing the old...