Replacing my Hynautic k31 steering cylinder with a new seastar unit. The bushings that attach the cylinder to the tiller arm have seen better days and I want to replace them while I've got everything apart. They appear to be copper or brass/bronze maybe? Anyone have a source for these bushings? ...

Anyone have any first hand experience with their hvac units? My condensing units don’t look pretty when removed during my repower. While I’m in there…. It may pay to replace the original 1988 units. These being r22 compatible seem very intriguing instead of replacing the air handlers as well

I don’t want to hijack the other thread but one thing I can’t wrap my head around is how the transformer can take 120 30A cord and make 240V. I thought the selector switch on the panel was running the 120v through a second transformer with 2 sets of coils, therefore 2 120v outputs with one leg of...

Why would someone remove the transformers from the ER? i know this vessel was wired for euro also, but what would be the benefit/reason behind this?

I’ve got a pair of damaged 24x22x4 props that will cost about $1600 to repair. I can buy a pair of good 24x23 props for $900. Wondering if that pitch difference is a big deal?

Can anybody verify if C.D. Pinner is still at Hatterass? Anybody left that knows what a print set is and can send a set out?

After our recent steering system troubleshooting, our Raymarine autopilot now thinks "go straight" means "turn hard left". I suspect it just needs to be recalibrated, but the dockside commissioning procedure asks a few questions I don't know the answers to. I tried the Raymarine forum, but when I...