Does anyone know what's involved if you want to replace non-bypass blowers on old twin dry turbo 6v92s with newer bypass blowers? The bypass blower reduces rotor lobe drag and can increase fuel economy. If you use the same ratio on the blower is it a bolt on mod, or will the bypass change the...

....... I've been playing around with laminating some teak onto the bow of my run-about. As I was wet-sanding the teak, I noticed that several strips had partially de-laminated. And now there is water underneath the teak. Any ideas on how to dry things out? And how to get some epoxy in there? ...

I take delivery of my new (to me) 58' YF with 8v71 ti's on Sunday. Does anyone have any fuel consumption information or know a site which might provide me with some general information?

I just got a quote for $2K to clean the heat exchanger on one motor, so I have decided to attempt this myself. I have seen quite a few threads on this site on the cleaning of the exchanger once it is removed. Any advice on removing the exchanger- (12V71TI's). I understand the exchanger is located...

We currently have a position opening up for a warehouse clerk /shipping and receiving person at our Fort Lauderdale location. We are looking for a young, energetic, and motivated individual interested in learning the Hatteras parts business and looking for an opportunity to become a long term...

have a 1967 34c with dual stations. there is a transfer lever on lower helm to switch steering from upper to lower station. Upper station is Hydraulic and lower is teleflex. The controll cable for the lever works but the mechanisem on the tiller is frozen. Do any of you have experience with...

We have a fair number of taylor-made fenders on our 53. I'm guessing they are approximately 2.5 feet long and maybe 10-12 inches in diameter. We are looking for something longer. Is any familiar with these: http://praktek.com/fenders/ or these? ...

Does anyone have a source or fix for the AC fan speed control? My salon control goes from virtually off to wind tunnel speed just fine, but the stateroom fan cannot be turned much below the wind tunnel setting. I like my AC on, and of course, the admiral wants to wrap up in 3 sleeping bags and...

I guess boating is a fetish, because I like to videotape my runs from time to time, using a camcorder on a tripod at the window and recording the passengers. Some are flat calms into a sunset, some are big sea runs. I get my jollies by watching the rerun on the big screen TV, esp. in the Winter...

Any one w/ advice as to how to best clear props, rudders, shafts etc from growth? The marine store i go to told me that the divers buy metal scrapers for the job....does that sound right? Can I cause any problems to my running gear w/ metal scrapers? Thank you.