My AC in the salon, the one next to the aft deck doors has a plugged drain line. I'm trying to figure out where it drain to. I looked under the aft cabin bed and it doesn't appear to be there. Does anyone know where it drains out to? My entire downstairs floor is carpeted. I'm guessing there...

I’m giving serious consideration to removing my cockpit operating station (’79 43C). I’ve never used it in all the eleven seasons I’ve had the boat, and the area it takes up would make a great out of the way spot to store coolers or canyon bags full of tuna. It has also caused me some grief when...

There were some engine photos recently on here, maybe from MikeP, and I noticed some green moisture residue on the sides of an engine expansion tank...just like mine after six years. When I checked closely on my engines, I found there is a four bolt flange connection to a larger flange with about...

Would like to get a tech manual for this engine. Any suggestions? My search struck out.

Was sold an Ocean Breeze compressor as a direct replacement for 7000 btu Cruiseair , will not work. The guy that installed it called Ocean Breeze and was told I need their control. Any thoughts?

I recently purchased and used a Dremel 1 & 1/2" Dia Metal Cutoff tool and I hereby report it worked great! It is a professionally packaged kit to use with an existing 10k rpm Dremel (if you have one), so as they say, the kit is sold separately from the Dremel. I had new to us home multi-head...

Over the winter I bought an older 13 foot Boston Whaler dingy to use around the bay this year. It's in great shape except that the bottom paint is almost completely gone. Once I remove what's left do I need to put an epoxy barrier coat on before I paint the bottom or can I just paint it. I don't...

The Hatteras 1510 club held the annual Rendezvous this past weekend in Portsmouth,Va. A total of 10 boats attended and about as many drive in/fly in members attended as well. After dealing with some rough water and some rain, the weekend weather was great. For those of you that are either not...

Just wanted to bring everyone up to date on my over heating problem. I changed the thermostat this weekend and checked with the temp gun at the housing which holds the thermostat and it checked out at 168 to 170 deg. It was a 170 deg. thermostat I replaced. Checked the starboard engine and was...

Is there someone who has first hand information on the Kat's magnetic Heaters? If so I would appreciate any info available. Thanks Werner Schoenknecht- MIRAGE