Struggling a little bit. I have an Onan 15.0 marine genset onboard my 1994 48’ Hatteras cpmy. The starter for the genset is having trouble engaging the bendix. I haven’t torn it apart but completely expect that the gear is worn. Hopefully not the flywheel. Does anyone know a source for a starter...

So 70 percent of the handrails look o.k. I have a section that the varnish or urethane is peeling off on. Just for kicks I brushed on some Teak oil. The sections were the urethane had peeled off and the wood was white turned basically black. I know teak oil is not the solution, but why would it...

Hey guys, I'm sorry if this has been asked before, but you can't search the forum and after looking thru 10 pages (and getting really distracted) I don't see a post about this. I have a 1981 61' MY model (now 70') and I am trying to swap everything to LED and the craziest thing... I have...

The old 15KW Onan is still working fine but anytime it so much as sputters I clench up thinking about what just could have broke. It's a great generator but the parts availability is about to make it impractical. And its loud. It's Very loud. I re did the sound shield with soundown and it's...

Looking for ways to keep out sun out of upper helm and aft deck during hot summer months. Any ideas for temporary sun block on interior isenglass?

It rare that I turn off my cell phone but I did and missed the txt at 8AM that they are pulling the generator out today (a week early). Then at Noon I got this wonderful photo. I put this job off because I could never find someone who wanted to deal with that removal, and it was too big for...

A couple questions for the forum. Has anyone replaced the cover plate’s slotted style screws for studs ? Seems a better method overall having studs where a nut is easily torqued to spec and installing gasket, cover etc. any reason not to install silicon bronze studs? Spline lubricant. ...