View Full Version : 12 Point Monitor Button
Any idea where to get little black push on button that goes on test and silence pegs? Have not yet checked with SAMS.
racclarkson@gmail.com
07-28-2016, 09:50 PM
Don't know if this will help or not. If one of the buttons isn't working; e.g., silence switch won't silence, you may be able to fix it. I had that issue and I solved it by pulling the button off the switch and spraying penetrating oil into the shaft, in place. After a good soaking and some time to penetrate, everything went back to normal. Had to press it a few times.
SEVEN
07-28-2016, 10:14 PM
I looked for a year without luck. I finally went to tap plastic and bought a small plastic dowel and cut it to size. Drilled a small pilot hole and glued it onto the pin. Cheap fix that looks great.
Thanks. Heard from Steve. SAMS to the rescue again.
Powered by vBulletin® Version 4.1.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.